When you are doing masonry work, you would require cutting some abrasive and dense materials like asphalt and concrete. If you have never done this work before, you might have some difficulties. You must be aware that cutting through concrete and asphalt cannot be done using a regular saw blade. You would need to use a special blade known as a diamond blade. So, what’s the best diamond blade to choose for using a circular saw?
If you are looking to buy the best 9 diamond blade for your circular saw, it is important to consider some factors to get the right one for you. The first thing is the speed. It is important to consider at what speed you would run the saw. If you run the saw at a moderate speed, the diamond blade will last for a long time and if you run it at a high speed then the blade will wear out at a faster pace. If you want a blade for cutting fast, you must buy the blade that is meant for that purpose.
The next factor that you should consider is how you would like to cut through things. Basically, there are two methods for cutting – dry and wet. You would have to decide whether you will go for dry cutting or wet cutting. It is important to note that dry cutting is harmful than wet cutting. When you dry cut concrete, a lot of dust will come off which will be inhaled by you.
It is imperative that you know how to use the diamond blade and when to replace it. You must not overuse the blade as it will be futile. You may end up damaging your cutting work if you are using an old and worn out diamond blade. Make sure you buy the best diamond blade with high longevity.